Bracket Camera

Surface Finishing of Bracket Camera – Polish / Texture

The product surface is finely ground using 1200# sandpaper or equivalent abrasive tools to eliminate roughness and imperfections, ensuring a smooth, uniform finish. This process enhances the gloss and overall appearance of the bracket camera. Following polishing, texturing is applied to elevate the bracket’s visual appeal and decorative quality, aligning with the automotive industry’s demand for both aesthetic precision and functional durability in molded components.

Parting Line Design of Bracket Camera

In mold design, parting lines, and slider lines play a key role in the injection molding process. Red is the parting line, blue is the slider line.

Draft Angle Analysis of Bracket Camera

In the green area of the design, we noticed a lack of pull-out angle, so we suggest considering adding 1 degree of pull-out angle on the side of the core, which will help to release the mold more easily.

Slider & Lifter Design of Bracket Camera

Slider and ejector designs are key components used in mold making, especially in the injection molding process. Their role is to allow the manufacture of plastic parts with complex internal or external geometries, as well as to handle protrusions or hollow structures in the product. Blue lines are parting lines of sliders.

Ejector Design of Bracket Camera

The ejector design is critical in plastic injection molding for the smooth removal of the molded plastic part from the mold.

Gate Type & Location & Size of Bracket Camera

We recommend the use of 1X YUDO hot nozzles in combination with a cold runner system and a tunnel gate to optimize the injection molding process and improve product quality and productivity. The gate locations for the 2 parts are not on the same side.

Reasonable mold layout design needs to take into account factors such as the injection molding machine, mold, cooling system, operating space and molded product removal to ensure the efficient operation of the production process and the quality of the final product.

Before delivery, we will fully maintain and clean the molds to make sure the surface of the molds are smooth and internal impurities. Then anti-shock material and protective padding are packed and put into wooden crates and labeled with model and quantity information.