Rear Fender For Car

Surface Finishing – Polish / Texture

The product surface is finely ground using 600# sandpaper or equivalent abrasive tools to eliminate roughness and imperfections, ensuring a smooth, uniform finish. This process enhances the gloss and overall appearance of the rear fenders for the car. Following polishing, texturing is applied to elevate the bracket’s visual appeal and decorative quality, aligning with the automotive industry’s demand for both aesthetic precision and functional durability in molded components.

Parting Line Design of Rear Fender

Parting line design is a very important step in the production of plastic products, it determines the location of the parting line of the mold, which affects the molding quality and productivity of the product. The parting line is the dividing line between the two halves of the mold, which determines how the mold will separate to take out the molded plastic part.

Draft Angle Analysis of Rear Fender

Draft angle analysis is a critical step in the design of plastic products to determine if the product geometry is suitable enough for mold making so that the molded part can be smoothly removed during demolding.

Slider & Lifter Design

Slider and ejector designs are key components used in mold making, especially in the injection molding process. Their role is to allow the manufacture of plastic parts with complex internal or external geometries, as well as to handle protrusions or hollow structures in the product.

Ejector Design of Rear Fender

The ejector design is critical in plastic injection molding for the smooth removal of the molded plastic part from the mold.

Gate Type & Location & Size of Rear Fender

In the plastic injection molding process, Gate Type, Location and Size are key factors in determining the quality and productivity of the molded product.

Reasonable mold layout design needs to take into account factors such as the injection molding machine, mold, cooling system, operating space and molded product removal to ensure the efficient operation of the production process and the quality of the final product.

Before delivery, we will fully maintain and clean the molds to make sure the surface of the molds are smooth and internal impurities. Then anti-shock material and protective padding are packed and put into wooden crates and labeled with model and quantity information.